A little bit of history
Back when the kit was issued it would have been powered by a 7.2 volt Nicad battery which took about 18 hours to trickle charge and lasted about 7 minutes. Today I am running the reissue on an 8.4 Volt Lipo which takes an hour to charge and lasts about 30 minutes, its also about half the weight of the original batteries.
The kit itself is very different from todays plastic and carbon kits which contain very few metal parts, the sand scorcher is almost entirely metal with parts made from stainless steel, aluminium and brass.
Its a real novelty to put together if your used to todays kits, it also makes for a more 'scale' drive as the weightier metal parts cause the car flop, lurch and bounce around far more realistically than a modern lightweight plastic kit.
I am not sure whether its the lighter, more powerful modern day battery, the rear wheel drive chassis, the desert sand or just my driving but the car is impossible to drive in a straight line. Every rear wheel drive radio controlled car I have ever driven has had this problem, but this one is the worst of the lot. One solution which many people have tried with RWD RC Cars is to put a gyroscope into the car.
A gyroscope fitted in my Tamiya M04 Rear Wheel Drive On Road Chassis.
The gyroscope senses the car beginning to fishtail and instantly steers into the skid (counter steers) to keep the car moving forward. This can also be useful over rough ground and jumps where the gyroscope will keep the front wheels pointing into the landing even if the car starts to rotate to the side in the air, this reduces the stress on landing minimising parts wear and breakage, it also keeps the speed up as the car 'digs in' less on the landing.
My F103GT RWD On Road Chassis demonstrating how to 'steer into' a skid or fishtail.
I have had limited success using gyros, the problem is that the gyroscope is passive, it applies the same level of counter steer regardless of the cars speed and the drivers intentions, for example if I am trying to turn left, the gryoscope will sense the car rotating and tell the wheels to turn right to keep the chassis straight. This counter steering effect is adjustable through 'Gain' this is a static setting which controls how hard the gryo will try to keep the car straight. What we need for effective 'Anti Yaw or Yaw Control' is active gain that keeps out of the way when you want to turn and gets straight on the job when you don't. This is where Arduino comes in.
Project Goals -
1) Easy to access user interface to set the base level of gain
2) Allow adjustment of the base level without needing to restart the Arduino or the Gyroscope
3) Actively adjust gain around the base level based on the signal coming from the controller
3.1) If the controller is telling the car to turn, reduce the gain so that the gyro does not fight the turn
3.2) If the controller is telling the car to accelerate or brake, increase the gain to prevent fishtail and spinout
4) Provide a simple means of turning the active components off for easy comparison between 'active anti yaw', 'passive gryo based anti yaw' and no anti yaw.
5) Provide an easy interface to set a maximum and minimum range for the servo, these limits will prevent the software/user command combination from sending signals to the servo which would cause it to exceed the mechanical limits of the model.
5.1) Record the range limits to the EEPROM for persistent storage
6) Record any operating errors to the EEPROM for persistent storage and retrieval
7) Use the project as a test bed for decoupling noise before progressing the traction control project
5) Provide an easy interface to set a maximum and minimum range for the servo, these limits will prevent the software/user command combination from sending signals to the servo which would cause it to exceed the mechanical limits of the model.
5.1) Record the range limits to the EEPROM for persistent storage
6) Record any operating errors to the EEPROM for persistent storage and retrieval
7) Use the project as a test bed for decoupling noise before progressing the traction control project
More soon. In the meantime, here is another picture of my fresh 'weathered' Sand Scorcher, the bodyshell is white plastic which I have painted and otherwise abused to look like 30 year old metal.
Is there a link to the latest source code?
ReplyDeleteGreat article which helps consumers and cars owners on how to get rid of their old vehicles and provided enough knowledge about cash for cars caboolture
ReplyDeleteYour post is just outstanding! thanks for such a post, it is really going great. Keep posting more about cash for cars
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteSuch a good work was done thanks for the working so hard for us you should have to be perfect about your work as you are I like to improve my skills also
ReplyDeletecash for cars caboolture
cash for cars ipswich
cash for cars brisbane
cash for cars logan
cash for cars toowoomba
cash for cars sunshine coast
cash for cars gold coast
cash for scrap cars caboolture
cash for scrap car toowoomba
cash for scrap cars ipswich
cash for scrap cars logan
cash for scrap cars brisbane
cash for scrap cars gold coast
The article has been very helpful and very informative. It provided people with new ideas about these
ReplyDeletecheap tyres underwood
cheap tyres logan
cheap tyres slacks creek
cheap tyres brisbane
super cheap tyres underwood
cheap tyres near me
cheap tyres in brisbane
cheap tyres in underwood
cheap second hand tyres brisbane
cheap tyres north brisbane
This is the remarkable article as well as it is valuable for the entire person and I want to say that I would like to write on this subject too. You have an interesting written on this topic.
ReplyDeleteScrap Car Removal Gold Coast
Great literally it's an amazing post I have ever seen please allow me to get your feed to keep up to date with your valuable quality posts. Regards cash for unwanted cars
ReplyDeleteHello!
ReplyDeleteYou said it very well and accurately, you wrote it elegantly. I was very happy. We used the content that you shared. Good luck.
I got your site address from a friend, from now on I will always visit your great site.used car buyer
Well written.
ReplyDeletecash for car beenleigh
ReplyDeleteExcellent Article! Thanks for sharing this types of article is very helpful for us! If you looking for best cash for unwanted cars Brisbane or Free Car Removal Gold Coast than Get Cash for Car is best place to help you.
ReplyDeleteExcellent Article! Thanks for sharing this types of article is very helpful for us! If you looking for free car removal Logan or free scrap car removal Cleveland than Carsbuyer is best place to help you.
Great Article! Thanks for sharing this types of article is very helpful for us! If you looking for Best Exterior Cleaning Services Brisbane than Quickcardetailing is best place to help you.
ReplyDeleteHave a junk car to sell in Brisbane Cash for Car? They are buying old cars, damaged by fire, wrecked vehicles, cars not running with or without title in Australia. Get instant and free junk car removal services in different cities of Australia.
ReplyDeleteBrisbane Top Wreckers is offering free towing within our towing zones to make it as convenient as possible. You can also choose to drop off your vehicle to a nearby Brisbane Top Wreckers and their team will help you to removal vehicle as fast as possible without charging a single amount of money, also they are selling best audi spare parts Brisbane.
ReplyDeleteStop searching for how to sell my car easily. Car Buyer's Hub is selling used vehicles to Professionals. Under Professionals we mean legal entities and individual businessmen that are interested in buying and selling of used cars.
ReplyDeleteGold Coast Hand Car Wash offers one of the best deep cleaning services in Australia. They provide a wide range of services such as best car leather protector, cut and polish services from customized cleaning to an express service.
ReplyDeletehi can u given me a schematic layout of the components? i want to built it too.
ReplyDeleteHello, witch gyro is used for this project please ? Pierre
ReplyDeleteAdding a gyroscope to the RWD RC car is a game-changer, enhancing stability and control like never before. It's a brilliant innovation that takes the thrill of racing to a whole new level. Kudos to the creators for this ingenious upgrade!
ReplyDeleteScrap Car Removal Liverpool